If you're pricing a new fence in Oklahoma City, the honest answer is: it depends on what you build and where. But that answer doesn't help you set a budget. This guide gives you real 2026 price ranges for the fences we build every week across the metro. It also covers what pushes a quote up or down and how to get an exact number for your yard.
Quick answer: fence cost per foot in OKC
Most residential fences in the Oklahoma City metro come in somewhere between $20 and $60 per linear foot installed. That price includes materials, posts set in concrete and labor. Here's how the common materials compare for a typical backyard:
| Fence type | Typical installed price per foot | About 150 ft of fence |
|---|---|---|
| Chain link (4 ft, galvanized) | $15 – $30 | $2,250 – $4,500 |
| Pressure-treated pine privacy (6 ft) | $20 – $32 | $3,000 – $4,800 |
| Cedar privacy (6 ft) | $25 – $45 | $3,750 – $6,750 |
| Vinyl privacy (6 ft) | $35 – $55 | $5,250 – $8,250 |
| Ornamental iron (4–5 ft) | $35 – $65 | $5,250 – $9,750 |
These are typical OKC-area ranges for 2026, not a quote. Your yard, your material choice and your gates set the real number. We'll give you that number for free.
What changes the price of a fence?
1. Material
Material is the biggest single factor. Chain link is the most budget-friendly way to enclose a yard. Cedar is the most popular choice for privacy in Oklahoma because it looks good and resists rot better than pine. Vinyl costs more up front but needs almost no upkeep. Ornamental iron sits at the top of the range, and it's the go-to around pools and front yards where you want security without blocking the view.
2. Height and style
A 6-foot privacy fence uses longer boards, taller posts and more labor than a 4-foot picket fence, so it costs more per foot. Style matters too. Board-on-board, shadowbox, horizontal boards and a cap-and-trim top all add material and time compared with a basic side-by-side privacy fence.
3. Posts built for Oklahoma wind
This is where cheap quotes cut corners. Oklahoma wind is hard on fences, and most leaning or blown-down fences fail at the posts. We set posts deep in concrete. On many wood fences we use steel posts, which cost a little more but won't rot at the ground line or snap in a storm. It's one of the best-value upgrades you can make. A cheaper fence that needs repairs after every spring storm usually costs more in the long run.
4. Total length
Longer runs cost more in total, but often less per foot, because setup and travel costs are spread across more fence. A typical OKC backyard needs somewhere between 120 and 200 feet of fence.
5. Gates
Every fence needs at least one gate, and gates cost more per foot than fence. A standard walk gate adds a few hundred dollars. A double drive gate wide enough for a truck or trailer costs more, especially with a steel frame that keeps it from sagging. See our gate options for what's possible.
6. Removing the old fence
If an old fence is coming down first, tear-out and haul-off are added to the quote. The cost depends on the length and on whether the old posts are set in concrete.
7. Your yard
Slopes, rock, tree roots, tight side yards and Oklahoma's red clay all affect how long a job takes. A flat, open yard is the quickest and least expensive to fence.
8. Permits and HOA rules
Some cities in the metro need a permit for a new fence, and many neighborhoods have HOA rules on height, material and color. Check before you choose a style. We're happy to help you figure out what your city and HOA allow.
Real example: a cedar backyard fence
Say you have a typical suburban backyard in Moore or south OKC. It has about 150 feet of 6-foot cedar privacy fence with one walk gate and no old fence to remove. That kind of job usually falls somewhere in the $4,000 to $6,500 range. Add a drive gate, steel posts or a cap-and-trim top and it moves toward the upper end. Start with a shorter run or pressure-treated pine and it moves lower.
Is a cheaper fence worth it?
Sometimes. If you need to keep a dog in on a budget, chain link does the job and lasts for decades. But for privacy fences, the lowest quote often means shallow posts, thinner boards or no concrete. In Oklahoma those are the fences we get called back to repair after the first big storm. It's worth asking every company you talk to how deep they set posts, what kind of posts they use, and what warranty they offer.
Can you finance a fence?
Yes. If you'd rather spread the cost out, we offer fence financing so you can get the fence you actually want now and pay over time.
How to get an exact price
The fastest way to a real number is a free on-site estimate. We measure your yard, talk through materials and gates, and give you a written price with no pressure. We're based in Moore and build fences across the Oklahoma City metro.
Call (405) 626-6601 or request your free estimate.
Frequently asked questions
Most 6-foot privacy fences in OKC cost about $20 to $45 per linear foot installed. Pine is at the lower end and cedar in the middle to upper part. Vinyl runs higher, at about $35 to $55 per foot.
Galvanized chain link is usually the least expensive fence to install. Among privacy fences, pressure-treated pine costs the least up front.
Yes. Tear-out and haul-off are priced separately, based on how much fence there is and whether the posts are set in concrete. It should show up as its own line on any estimate you get, so you can see exactly what it costs.
Most residential fences take one to three days once materials are on site. Larger properties, iron fences and custom gates can take longer.

